News

2024-04-15

Stark at the TUBE 2024

Hall 6 - Stand J22

From 15 to 19 April 2024, TUBE will be held in Düsseldorf, Germany. The fair is the benchmark event for the tube industry, with over 57,000 square metres of exhibition space.

Our metal cutting blades will be on display in Hall 6J22, where STARK staff will be at your disposal.

Don't miss the opportunity to visit our stand at TUBE and discover the latest innovations in the industry!

2024-03-31

Happy Easter

STARK S.p.A. wil be closed on Monday 01st April 2024.

Work activities will resume on Tuesday 02nd April 2024.

We wish you all Happy Easter.

2024-03-19

Stark at the HOLZ-HANDWERK / FENSTERBAU FRONTALE 2024

Hall 10.00 - Stand 216

STARK spa will be present at the HOLZ-HANDWERK / FENSTERBAU FRONTALE 2024 trade fair, which will be held from 19 to 22 March in Nuremberg, Germany.

Our blades together with STARK staff will be present at hall 10.0, stand 216.

Visit us!

2024-03-07

At Stark, we have chosen to support the Alfieri Heart Foundation

We invite you to share this journey of solidarity with us

At Stark, we have chosen to support the Alfieri Heart Foundation at the San Raffaele Hospital in Milan.

Our commitment helps fund research and the development of new treatments for heart disease, thus improving the lives of many.

We invite you to share this journey of solidarity with us.

Every donation is a gesture of hope that turns into action.

To support this cause, visit the Alfieri Foundation website and do your part.

More information: https://www.alfierifoundation.com/

2024-02-13

First four months of the year full of trade fairs for STARK!

Stark at the Indian Wood international trade fair

First four months of the year full of trade fairs for STARK!

We start with the INDIA WOOD international trade fair, now in its 13th edition dedicated to wood and panel processing technologies. The event will be held at Bangalore International Exhibition Centre (BIEC), from 22 to 26 February 2024.

STARK together with Total Tools & Equipments, we will be present in Hall 3B booth G130, where we will exhibit the complete range of blades and tools for cutting and woodworking.

We look forward to seeing you there!

2023-11-07

STARK at the METALEX 2023 exhibition

We look forward to seeing you at stand BL29 at the METALEX exhibition in Bitec-Bangkok

From 22 to 25 November 2023, our metal cutting blades will be on display at THAISAKOL GROUP CO.,LTD., STARK's official distributor for Thailand.

We look forward to seeing you at stand BL29 at the METALEX exhibition in Bitec-Bangkok!

2023-10-10

WOODTEC 2023 Brno - Czech Republic

Stark spa and Jindrich Novotny

From 10 to 13 October, together with our dealer Jindrich Novotny, we will be present at the WOODTEC trade fair in Brno - Czech Republic.

Visit us at Hall Z, booth nr. 40!

2023-10-03

Stark at the TOOLEX fair in Poland

International Fair of Machine Tools

STARK at TOOLEX, International Fair of Machine Tools, Tools and Processing Technology!

STARK together with its partner GLAMAR will be present from 3 to 5 October at booth 135 in Katowice, MCK in Poland.

Visit us!

2023-09-04

Supreme II

New Collection

We are pleased to introduce you to the new SUPREME II blades by STARK. The Cermet Supreme blades have been specially designed and manufactured to offer high performance in the cutting of solid sections on static cutting machines.

  • High performance: The SUPREME II blades by STARK ensure precise cuts and maximum speed performance on solid steel sections, thanks to their optimized geometry and the use of a Cermet quality developed in collaboration with a Japanese manufacturer.
  • Exceptional durability: Thanks to our Cermet, the SUPREME II blades guarantee a high number of cuts and a very long tool life.
  • Vibration Reduction: STARK’s SUPREME II blades have been designed to minimize vibrations during the cutting of solid metal sections. This aspect helps to improve the performance of the circular saw when cutting. By reducing blade wear, we can ensure a more precise and uniform cut, eliminating the need for additional surface finishing steps.
  • Reduced heat generation: The SUPREME II blades dissipate heat more efficiently compared to traditional blades, reducing the risk of overheating and material deformation during cutting.
  • Energy efficiency: The low run-out and high cutting precision reduce power consumption during cutting, resulting in a significant reduction in energy costs when using SUPREME II blades.

2023-06-14

TUBE CHINA 2023 - Shanghai

STARK TOOLS (SUZHOU) CO., LTD. is waiting for you at booth W4-1B05

Today is the first day of TUBE CHINA 2023, Shanghai.

STARK TOOLS (SUZHOU) CO., LTD. is waiting for you at booth W4-1B05!

2023-06-06

STARK TOOLS (SUZHOU) CO., LTD at TUBE CHINA

Booth W4-1B05 - Shanghai

Next week sees the start in Shanghai of the international trade fair TUBE CHINAAsia's most important event dedicated to the tube industry.

Our Chinese subsidiary STARK TOOLS (SUZHOU) CO., LTD. will attend it with STARK's leading metal cutting blades.

We look forward to seeing you there from June 14 to 16 at booth W4-1B05.

2023-05-15

Stark SpA at LIGNA 2023 - Hannover-Germany

Hall 15, Srand F77

LIGNA is the leading trade fair for the operators of the wooden manufacturing sector.

As usal the event will be held in Hannover (Germany), from 15 to 19 May 2023.

STARK SpA, always present at the event, will be exhibiting at HALL 15 STAND F77

We wait for you!!

2023-05-09

STARK at EXPOMAFE

In collaboration with Brazilian partner G.D.V.

From May 9 to 13, 2023, the international Machine Tools and Industrial Automation event Expomafe trade fair was held in Brazil, in the fairgrounds of the Brazilian capital São Paulo.

In collaboration with Brazilian partner G.D.V., Stark could not miss one of the biggest industry events in Latin America.

We thank all those who came to visit us, and to touch the quality of our products, and we renew our invitation for the next edition.

2023-02-07

WOODWORKING 2023

STARK WOODWORKING ALL IN ONE 2023 CATALOGUE

We are pleased to announce the release of the new STARK WOODWORKING ALL IN ONE 2022 CATALOGUE, totally renewed and developed to offer you a complete, useful and user-friendly technical tool.
This catalogue stems from the need to offer customers a renewed and improved range of woodworking and panel processing tools.

The new ALL IN ONE 2023 catalogue is divided into different sections; this is to give the possibility of easy consultation:

• BASIC LINE (dedicated to woodworking tools with manual advances)
INDUSTRIAL LINE (dedicated to woodworking tools with mechanical advances)
• CNC (a complete line of tools for CNC machines)
• DYNAMIC LINE (dedicated to professional TCT circular saw blades)
• RICAMBI (section dedicated to all our spare parts)

Please do not hesitate to contact us for any clarifications.

Download the catalogue from the link:

WOODWORKING_2023

2022-11-07

Stark: celebrating 60 years of sawing excellence

The article published in the well-known international magazine Tube&Pipe

Don't miss the interesting article dedicated to STARK entitled "Stark: celebrating 60 years of sawing excellence".

The article published in the well-known international magazine Tube&Pipe can be consulted at the following link:

https://intras-library.cld.bz/TPT-November-2022

2022-11-02

Stark, sixty years of world-renowned tools

Article published in XYLON magazine - November/December 2022

In the well-known trade magazine XYLON, in the FOCUS TRIVENETO section, you will find the exciting story of the STARK company, which is celebrating its 60th anniversary, narrated by Gianni Mussio sales director of the Trivignano Udinese-based company.

The article is available at the following link:

STARK - XYLON_11_2022

2022-09-30

SIXTY YEARS OF SUCCESS

STARK 1962-2022

On Friday 30 September 2022 we celebrated the 60th anniversary of our successful company.
We did it together with all our current employees and also with those who, until they left the company for retirement, worked with us putting passion, heart and soul into their work.

It is thanks to all these people that Stark has become the company it is today because companies are made up of people who have these values, not just skills but passion, soul and heart.

We were happy to have been able to thank all those present. Over the years, this magnificent celebration will remain an indelible memory for all of us.

2022-09-29

MIAC 2022

STARK S.p.A. reconfirms its presence at MIAC 2022

STARK S.p.A. reconfirms its presence at MIAC 2022, the trade fair for Paper and Board Production Technologies for Tissue Paper Converting.

We look forward to seeing you at pavilion 167 from 12 to 14 October 2022 in Lucca!

2022-08-03

60th anniversary of STARK SpA

Brochure 1962-2022

Our company is pleased to share with you all the important milestones reached in the year 2022.

Through the attached brochure, we share this joy with you who are part of the STARK project, a project of which we are all proud.

Download the STARK brochure

2022-07-12

FENSTERBAU FRONTALE 2022

12 - 15 July 2022 / Nuremberg, Germany / Hall 8/8 - 328

FENSTERBAU FRONTALE 2022

12 - 15 July 2022 / Nuremberg, Germany

Visit us! Hall 8/8 - 328

https://www.frontale.de/en

2022-06-20

TUBE 2022

Düsseldorf (Germany), 20-24/06/2022 - Hall 6 stand J22

STARK SpA, always present at TUBE fair, will be exhibiting at the following stand coordinates:

Hall 6 stand J22.

TUBE 2022 will be in Duesseldorf from 20st June 2022 to 24st June 2022.

https://www.tube-tradefair.com/

We wait for you!

2021-09-16

Why visiting MIAC?

Lucca (IT), 13-15/10/2021 - stand 170

As reported by the official website of the fair,

"Visiting MIAC 2021 means obtaining a 360° overview of the technologies and equipment in the paper industry, from the Production of Paper and Cardboard to the Transformation of Tissue Paper. MIAC 2021 allows the technicians of the Paper Mill and of the Tissue Paper Transformers to update themselves professionally. Visitor of MIAC 2021 can meet the leading international suppliers of the Paper Industry in one place and under the same roof. MIAC 2021, 3 days of professional and business training!"


For the first time STARK S.p.A. will exhibit at the MIAC fair, the fair for the Technologies for the Production of Paper and Cardboard and for the Transformation of Tissue Paper.

The entrance ticket is free for all operators in the sector.

 There are two modes to access:

1. Online pre-registration: With the online pre-registration you are guaranteed access to the MIAC 2021 without having to queue to visit the event.  Click here to start the pre-registration

2. On-site registration: It is always possible to access the MIAC 2021 by registering directly onsite on the day of your visit at the “non-pre-registered reception”. Click here to download the Invitation Ticket for on-site registration

We wait for you at stand 170!

 

2021-07-19

MIAC: online pre-registration and invitation ticket

Lucca (IT), 13-15/10/2021- stand 170

For the first time STARK S.p.A. will exhibit at MIAC, the fair for the Technologies and Machinery for the Production of Paper and Paperboard and for the Converting of Tissue Paper.

 The entrance ticket is free for all operators in the sector.

 There are two modes to access:

1. Online pre-registration (recommended mode)

With the online pre-registration you are guaranteed access to the MIAC 2021 without having to queue to visit the event.

 Click here to start the pre-registration

2. On-site registration

It is always possible to access the MIAC 2021 by registering directly onsite on the day of your visit at the “non-pre-registered reception”.

Click here to download the Invitation Ticket for on-site registration

We wait for you at stand 170!

2021-06-29

ISO 9001 Quality Certificate

Valid until 24/06/2021

On 04/06/2021, STARK S.p.A. has again obtained the ISO 9001 certification which will be valid until 06/06/2024.

The TUV certification body has once again recognized our commitment to the adoption of constantly advanced production systems and constantly monitored production processes.

STARK S.p.A. was one of the first companies in the sector to obtain the ISO 9001 quality management certification which guarantees to our Customers an efficient customer care service.


Download the certificate in Italian-English


Download of the certificate in Italian-German

2021-06-17

STARK exhibits at MIAC 2021

Lucca (IT), 13-15/10/2021

For the very first time, STARK S.p.A. will exhibit at MIAC, the fair for Technolgies and Machinery for the Production of Paper and Paperboard and for the Converting of Tissue Paper.

We will show at stand 170.

We wait for you!

2021-05-14

New "METAL CUTTING SAW BLADES" price list 05/2021

The new "METAL CUTTING SAW BLADES" price list ed. 05/2021 will come into force starting from 17/05/2021.

In it you will find important news regarding metal cutting.

To request it, write to info@starktools.com and we will send you the download link.

2021-01-25

POR FESR

STARK 4.0 – IMPLEMENTAZIONE DEL PROCESSO PRODUTTIVO

POR FESR 2014-2020 2.3.a.1 bis

Descrizione

L’azienda Stark S.p.a. è da anni azienda leader nella produzione di seghe circolari in acciaio super rapido, seghe a frizione, DIN e seghe T.C.T.. Per garantire qualità ed elevata produttività, l’azienda  implementa il processo produttivo con l’acquisto e l’installazione di un macchinario per la lavorazione degli utensili, quale una cella di rettifica di corpi lame circolari in acciaio super-rapido (HSS).

Obiettivi

Grazie all’inserimento del macchinario automatizzato di ultima generazione, la Stark S.p.a. si prefigge di raggiungere i seguenti obiettivi:

  • riduzione dei tempi;
  • aumento dei volumi;
  • razionalizzazione della produzione.

Scarica il pdf del progetto

FINANZIAMENTO CONCESSO: € 138.495,00

SPESA AMMESSA: € 1.384.950,00

2020-04-15

Resumption of productive activities

Starting from Today, 15/04/2020, STARK S.p.A resumes regular business hours and productive activities.


Our Sales Department as well as the Area Managers are at your disposal both by phone and e-mail.

2020-04-06

Resumption of operational activities

New DPCM

As per the new DPCM dtd. 01/04/2020 issued by the Italian Government, most Italian companies are closed until 13/04/2020 included.

STARK S.p.A. guarantees the operational continuity to the Customers. Our Sales Department as well as the Area Managers can be reached both by telephone and by e-mail.

The total reopening, unless new provisions, is scheduled for Tuesday 14/04/2020.

2020-03-23

COVID-19: Suspension of productive activity

As per the new DPCM dtd. 22/03/2020 issued by the Italian Government,STARK S.p.A. announces the suspension of the production activity from Tuesday 24/03/2020 to Friday 03/04/2020.

The reopening is scheduled for Monday 06/04/2020 provided that new elements do not intervene to defer it.
 
Request of prices and orders will be processed when the factory reopens.

Both our Area Managers (via mobile and e-mail)  and Sales Department (via e-mail) will however be available by e-mail for any request You may have.

2020-03-02

GRINDTEC, HOLZHANDWERK AND TUBE POSPONED

GRINDTEC, HOLZHANDWERK and TUBE have been postponed as per the fair organizers notices listed hereunder:

Grindtec: official notice by the fair organizer

Holzhandwerk: official notice by the fair organizer

Tube: official notice by the fair organizer

We will publish new information as soon as the fair organizers will plan the new dates.


2020-03-02

New General Manager of STARK TOOLS (SUZHOU) CO., LTD.

Since yesterday, 01/03/2020 Mr. DongDong Zhai has been the new General Manager of the Chinese Branch, STARK TOOLS (SUZHOU) CO., LTD. based in Zhangjiagang.

The Management of STARK S.p.A. welcomes Mr. DongDong Zhai to STARK Group.

 

2019-12-05

HOLZHANDWERK 2020

STAND COORDINATES

STARK SpA, always present at HOLZHANDWERK fair, will be exhibiting at the following stand coordinates: Hall 8 stand 330.

HOLZHANDWERK 2020 will be in Nurnberg from 18th March 2020 to 21st March 2020.

 We wait for you!

2019-10-21

TUBE 2020

STAND COORDINATES

STARK SpA, always present at TUBE fair, will be exhibiting at the following stand coordinates:

 Hall 6 stand J22.

TUBE 2020 will be in Duesseldorf from 30st March 2020 to 3rd April 2020.

We wait for you!

2019-09-10

GRINDTEC 2020

STAND COORDINATES

STARK SpA, always present at GRINDTEC fair, will be exhibiting at the following stand coordinates:

Hall 5 stand 5057

 Grindtec 2020 will be in Augsburg from 18th to 21st March 2020.

We wait for you!

2019-05-17

FAIR LIGNA 2019: -10 days at the most important trade fair in the wood industry!

Hannover, 27-31/05/2019 - HALL 15 STAND F77

LIGNA is the leading trade fair for the operators of the wooden manufacturing sector.

As usal the event will be held in Hannover (Germany) .

STARK SpA, always present at the event, will be exhibiting at HALL 15 STAND F77!

We wait for you !!

2019-02-19

STARK exhibits at LIGNA 2019

Hannover, 27-31/05/2019

LIGNA is the leading trade fair for the operators of the wooden manufacturing sector.

As usal the event will be held in Hannover (Germany) .

STARK SpA, always present at the event, will be exhibiting at HALL 15 STAND F77!

We wait for you !!

2018-06-20

POR FESR

INNOVAZIONE DI TRATTAMENTI SU DISCHI IN HSS PER CONTENERE L'AUSTENITE RESIDUA E I CONSUMI ENERGETICI

POR FESR 2014-2020 1.3.a Ricerca e sviluppo - Agroalimentare e Filiere produttive strategiche bando 2017

Descrizione

La STARK S.p.A. intende modificare il processo di trattamento termico di rinvenimento per i dischi in HSS destinati al taglio dei metalli, in quanto il processo attualmente determina una trasformazione dell'austenite in martensite con valori residui che non scendono sotto il 3% mentre una revisione progettuale della fase di rinvenimento potrebbe portare il valore sotto il valore di 1% con benefici tangibili per il prodotto finito e con una significativa contrazione del lead time di prodotto.

Obiettivi

Diversi gli obiettivi che l’Azienda intende raggiungere tra i quali riduzione del lead time di almeno 3 giorni lavorativi,  abbassamento della percentuale di austenite residua ad un valore inferiore di 1%, incremento delle prestazioni tensili e qualitative del prodotto a parità di durezza superficiale dei taglienti, riduzione dei consumi energetici fino a -5% dei valori attuali.

Scarica il pdf del progetto

FINANZIAMENTO CONCESSO: € 98.904,70

SPESA AMMESSA: € 263.674,00

2018-05-21

DYNAMIC LINE

BEST CLASSICS EVER AND MORE...

Stark S.p.A. is pleased to present "DYNAMIC LINE", the across-the-board line in the market!


Alongside the "traditional" blades (series "LEGEND") suitable for cutting both metal and wood, you will find the new series "EVOLUTION" (chrome blades for cutting wood) and "FUTUREX" (coated blades for cutting non-ferrous materials, wood and dry cut).  


EVOLUTION, NEW CHROME-PLATED / LOW NOISE BLADE LINE 


Chrome-plated coating is an anti-corrosion coating that protects the blade from rust and also a non-sticking treatment: it helps wood chips to flow better so not to stick on the saw body.

 

The slots are filled with sound-absorbing resing which reduces the noise while cutting and also reduces vibrations during cutting so to improve finishing on the work piece. 


FUTUREX, TCT CIRCULAR SAW BLADES COATED PVD

 

Futurex coated blades, both new and resharpened, ensure incredibly better performances than classical blades! 


SURFACE HARDNESS: coating increases hardness on the cutting edge so to allow the blades less wear out while cutting. 


THE COATING acts as a thermal barrier between the cutting zone and the saw body so toavoid any possible blade deformation. 


LESS CUTTING FRICTION: thanks to the low fiction coefficient, coating allows the blade to cut smoother and better. 


NO MATERIAL STICKING ON THE BLADE: while cutting chips are flowing easly so to improve the finishing of the cut (less markes on the surface cut). 


The benefits of what above described grant the following further benefits are as follows: 


1. reduced machines downtime (granted by the longer blade life) 

2. less machine power absorption: thanks to the lower friction while cutting the coated blade reduces the cutting resistance

3. less blade maintenance and grinding costs

The FUTUREX sawblade grants high cutting performances thanks to the PVD coating protecting the teeth and on the saw body.

 

After regrinding operations coating is removed (face and top), but always sticks on the side edged of the carbide tip where actually the frictions is present while cutting so to grant always outstanding cutting performance along the whole blade life.

 

For further information, please click here

2018-05-18

POR FESR

INSERIMENTO IN NUOVI MERCATI TRAMITE LA PARTECIPAZIONE A FIERE INTERNAZIONALI

POR FESR 2014-2020 – Linea di intervento 2.2.a.3 – Area di crisi della Sedia

Descrizione

STARK è presente in molti mercati internazionali tanto che la percentuale più importante del fatturato aziendale deriva dalle esportazioni. L’obiettivo aziendale è che, con il tempo e grazie alla continua innovazione tecnologica, agli investimenti in promozione e marketing ed al potenziamento della propria presenza commerciale, possa aumentare ulteriormente la proprio capillarità sui mercati internazionali.

Obiettivi

La partecipazione a fiere internazionali permetterà all’azienda di adottare strategie promozionali per incrementare la visibilità del marchio, oltre a potenziare la visibilità dell’azienda alla clientela estera.

Scarica il pdf del progetto

FINANZIAMENTO CONCESSO: € 29.775,96

SPESA AMMESSA: € 74.439,90

2018-04-26

XYLEXPO: ON LINE PRE-REGISTRATIONS

RHO (MILAN - ITALY), 08-12/05/2018

We are very glad to inform you that the on line pre-registrations for Xylexpo 2018 are open!

The entrance is forbidden to children under 12 years, even if accompanied by an adult.

ATTENTION: Previous the pre-registration the entrance at the show is free of charge. The pre-registration service well be active till midnight on May 7th. After midnight on 7 May the entrance for visitors will be on payment, previous registration at the reception desks of the show.

The ticket's cost for the entrance after midnight on May 7th is the following:
* Euro 15 – daily entrance
* Euro 25 – 5 days event 

For futher information, please click on the following link

XYLEXPO PRE-REGISTRATION

Visit us in HALL 1 STAND P20!

2018-03-21

"METAL CUTTING SAW BLADES" CATALOGUE

ED. 2018

Printed in March, the new "METAL CUTTING SAW BLADES" included all our lines for metal cutting.

For more information, please download here the catalogue

2018-02-15

TUBE, XYLEXPO, METALTECH AND SAW EXPO

STAND COORDINATES

STARK SpA, always present at these fairs, will be exhibiting at the following stand coordinates:

TUBE: Duesseldorf, 16-20/04/2018 - Hall 6 stand E08 - for more information about the fair

XYLEXPO: Rho (Mi), - 08-12/05/2018 - Hall 1 stand P20 - for more information about the fair

For the very first time, we will be present at Metaltech and Saw Expo.

METALTECH: Kuala Lampur, 23-26/05/2018 - Hall 4 stand 4104 - for more information about the fair

SAW EXPO:  Augsburg, 19-22/06/2018 - Hall 5 stand 315 -  for more information about the fair

 We wait for you !!

2017-12-08

GRINDTEC AND HOLZHANDWERK

Stand coordinates

STARK SpA, always present at these fairs, will be exhibiting at the following stand coordinates:

GRINDTEC: Hall 3 stand 3090

HOLZHANDWERK: Hall 10 stand 302

We wait for you !!

2017-06-15

"WOODWORKING - ALL IN ONE" CATALOGUE

ED. 2017

We are very glad to inform you that we have printed the new "WOODWORKING -  ALL IN ONE - 2017" catalogue which includes 4 different tooling lines for woodworking:

- BASIC LINE: Tooling line for classic single spindle and combined machines

- INDUSTRIAL LINE: Tooling line for moulding and finger joint machines

- CNC: Tooling line for drilling and CNC machining centers and routers

- DYNAMIC LINE: TCT circular saw blades line for sizing machines and HSS circular saw blades line for metal cutting cut-off machines

For more information, please download the new catalog "WOODWORKING - ALL IN ONE - 2017"

2017-06-05

STARK at EMO 2017 - Hall 15 stand C49

Hannover, 18-23 September 2017

 STARK S.p.A. exhibitis at EMO 2017 which is organized by VDA (the German Machine Tool Builders' Association) in collaboration with CECIMO (the European Association of the Machine Tool Industries). EMO Hannover, the leading trade fair of the sector, presents an unequalled width and depth of products and services throughout all production areas, from the nucleus machine tool, to precision tools, to linking devices and industrial electronics.

2017-03-20

STARK exhibits at LIGNA, Hall 12 stand A10

Hannover, 22-26/05/2017

LIGNA is the leading trade fair for the operators of the wooden manufacturing sector.

As usal the event will be held in Hannover (Germany) .

STARK SpA, always present at the event, will be exhibiting at HALL 12 STAND A10!

We wait for you !!

JOIN US AT 2017 FAIRS!

2016-04-06

XYLEXPO 2016 PRE-REGISTRATIONS OPEN!

Rho (MI), 24-28/05/2016

The on line pre-registrations for Xylexpo 2016 are open!

Further the on line pre-registration the entrance to Xylexpo 2016 is free of charge.

The pre-registration service will be ctive until 23/05/2016. 

After midnight on 23th May 2016 the entrance for visitors will be on payment.

For futher information, please click on the following link

Xylexpo pre-registration

Visit us at Hall 2, stand A19!

JOIN US AT 2016 FAIRS!

2016-01-14

4 fairs, 4 appointments to discuss and debate also in 2016

JOIN US AT 2016 FAIRS

Despite the difficult global economic situation, STARK SpA is strongly  investing in important marketing activities and in 2016 we will exhibit, therefore, at the following fairs:

  • GRINDTEC: Augsburg (Germany) from 16 to 19/03/2016 – Hall 2 stand 2022
  • HOLZ HANDWERK: Nϋrnberg (Germany) from 16 to 19/03/2016 – Hall 10.02 stand 10.02-302
  • TUBE: Dϋsseldorf (Germany) from 04 to 08/04/2016 – Hall 6 stand F30
  • XYLEXPO: Rho (Italy) from 24 to 28/05/2016 – waiting for stand coordinates 

4 appointments to discuss and debate, to introduce new products and high light our range.

Come and visit us! See you there!

JOIN US AT 2016 FAIRS

2015-09-15

STARK exhibits at TUBOTECH

São Paulo (BR), 6-8/10/2015

What a rich year in fairs: STARK will exhibit at Tubotech also that will be held from 6 to 8 October 2015 at São Paulo (Brazil) fairs center.

International fair of pipes, fittings and components, Tubotech represents an exceptional opportunity for visitors from Brazil and neighboring countries for detailed information on these sectors.

STARK S.p.A. will be represented by subsidiary STARK DO BRASIL.

We will wait for you at RUA 300 - STAND 324!

JOIN US AT 2015 FAIRS!

2015-07-23

FAIR EMO 2015: -74 days at the most important trade fair in the industry!

Milan, 05-10/10/2015

EMO is the leading trade fair for the operators of the manufacturing sector.

This year the event will be held in Rho (Milan) October 5 to 10 in conjunction with EXPO 2015.

STARK SpA, always present at the event, will be exhibiting at HALL 18 STAND E08!

We wait for you !!

JOIN US AT 2015 FAIRS!

2015-04-30

LIGNA & MADE IN STEEL: NEW OPPORTUNITIES ON THE HORIZON

The exhibitions Ligna (11-15 / 05/2015) and Made in Steel (20-22 / 05/2015) will start in afew days!

We expect you to our booths about which we communicate the coordinates:

LIGNA: Hannover (Germany), PAD. 14 - STAND H35

MADE IN STEEL: Rho (Italy), PAD. 8p - STAND L33

JOIN US AT 2015 FAIRS

2015-03-19

A year full of exhibitions!

Despite the difficult global economic situation, STARK SpA is heavly investing in important marketing activities: this to gather opinions, suggestions and impressions over the market changes in order to develop an accurate response to customers needs.

 In 2015 STARK SPA exhibits, therefore, the following shows:

  • FORMATOOL: Celje (Slovenia) from 21 to 04/24/2015
  • LIGNA: Hannover (Germany) from 11 to 05/15/2015
  • MADE IN STEEL: Rho (Italy) from 20 to 05/22/2015
  • EMO: Rho (Italy) from 5 to 10/10/2015

 4 appointments to discuss and debate, to introduce new products and high light our range.

 Soon we will publish the coordinates of our stand. So ... Come and visit us! See you there!

 JOIN US AT 2015 FAIRS!

2015-01-26

STARK exhibits at MADE IN STEEL

Rho, 20-21-22 May 2015

STARK S.p.A. will exhibit at MADE IN STEEL, which since it was first held in 2005 has offered a completely innovative formula, summed up by the expression conference & exhibition.

MADE IN STEEL presents itself as:

  • "a new exhibition concept" where steel is the leding actor. Steel is "a material underlying the world’s wellbeing, in the past, present and future. A raw material with a structural and strategic value."
  • "an industry event: the solution is not in dividing but in aggregating. Letting information, ideas, projects and innovation free to circulate throughout the whole steel industry"
  • "an international event: The steel industry is a global market, which features the typical excellent examples of «Corporate Italy». Made in Steel has decided to expand its borders, making internationalization a necessary objective."

2014-10-01

Discover "Olimpic Line", fully dedicated to tube cutting applications!

50 Years Experience in Metal Cutting Saw blades Production along with constant technical cooperation with Pipe Producers and Machine Manufacturers, enable us to present our high performance OLYMPIC Line, fully dedicated to tube cutting applications.

Olympic Line includes 3 kinds of blades:

  • HSS circular saw blades
  • T.C.T. saw blades THROW-AWAY
  • T.C.T. saw blades RESHARPENABLE

Here under we present the highlights for every  kind of blade:

HSS circular saw blade: It  is an alternative to T.C.T saw blades for tube cutting. Thanks to its special steel and PVD coating , it can be used at the same peripheral speed of T.C.T. circular saw blades. The feed rates in the central area of tube crossing are 40% higher than feed rates of T.C.T. saw blades and so this blade cuts thin tubes 20% faster than T.C.T. saws.

It is suitable for carbon steel, alloyed steel with high tensile strenght, stainless steel, inox and no ferrous materials.

T.C.T. SAW BLADES THROW AWAY: During last years the tube processing technology changed a lot; steel’s higher tensile strength values, thicker tube thickness, faster production line speed are often required from the customers.

The new range includes:

OLYMPIC 100: suitable for hard material, cutting with low vibrations

OLYMPIC 200: suitable for stainless steel cutting.

T.C.T. SAW BLADES RESHARPENABLE: STARK OLYMPIC includes also a line of .TC.T.  circular saw blades suitable for orbital cutting machines. For cutting tubes with big dimensions the customers are using orbital cutting heads equipped with 2-3 or 4 blades. STARK developed a new PVD coated resharpenable blade with special tooth shape with the target to reduce the effort during cutting and to reach a longer tool life.

According to the section and the material to be cut, STARK can supply different toothing geometries special developed to obtain the highest cutting performance.

2014-05-12

STARK presents JOINTEX

Xylexpo 2014, Hall 2 Stand D22

STARK S.p.A. will present the new JOINTEX at the Xylexpo Fair.

Jointex will change the finger jointing world and it is patent pending.

For more information, please download the catalogue

Download Jointex

2014-04-23

STARK exhibits at XYLEXPO, Hall 2 stand D22

Milan, 13 - 17 May 2014

STARK S.p.A. participate in the 24^ Xylexpo organized, as usual, in collaboration with dall'ACIMALL Eumabois. Since 1968 Xylexpo, even years, is the largest international trade show dedicated to the machines for working with wood and supplies for the furniture industry.

2014-03-26

STARK exhibits at TUBE, Hall 6 stand F32

Duesseldorf, 07 - 11 April 2014

The TUBE Duesseldorf is the leading international trade fair dedicated to the cutting of the pipe. STARK S.p.A. participates together with the German subsidiary STARK GmbH

2014-02-28

STARK exhibits at GRINDTECH 2014, Hall 2 stand 2013

Augsburg, 19 - 22 March 2014

It is the international leading platform for Grinding Technology and counts among the most dynamically growing technical trade fairs. Since its première in 1998 the amount of its visitors has increased threefold, and that of the exhibitors fourfold, while the amount of space covered was at the last count seven times the size of that at the first edition.

2014-01-24

STARK exhibits at SAMUMETAL 2014

Pordenone, 29 January / 01 February 2014

2013-11-11

STARK exhibits at TUBITALY 2013

Piacenza, 14-16 November 2013

2013-07-26

STARK at EMO 2013

Hannover, 16-21 September 2013, Hall 15 stand B16

 STARK S.p.A. exhibitis at EMO 2013 which is organized by VDA (the German Machine Tool Builders' Association) in collaboration with CECIMO (the European Association of the Machine Tool Industries). EMO Hannover, the leading trade fair of the sector, presents an unequalled width and depth of products and services throughout all production areas, from the nucleus machine tool, to precision tools, to linking devices and industrial electronics.

2012-08-28

Discover the new line of PVD circular saw blades for panel cutting

STARK introduces in the market the new S12 CTD, a line of PVD circular saw blades for panel cutting.

After careful testing at our major customers, we found that these blades get very good cutting results: 2 times more than the traditional saws!

The coating also covers the tooth ensuring a longer life of the blade.
Suitable for cutting:

  • MDF;
  • plastic laminate;
  • chipboard;
  • plywood.

Download brochure S12 CTD

2012-06-24

Stark's exposition in Indonesia

INASAL Fair 11 to 13 July 2012, Stand C 16

STARK S.p.A. will participate in the fair Inasal ° with the collective organized by the Chamber of Commerce of Udine. Inasal is the first fair of the aluminum and organized by the Ministry of Industry of Indonesia in cooperation with Indonesian Iron and Steel Industry Association (IISIA) and Association of Indonesian Aluminium Extrusion Producer (APRALEX).

2012-04-24

Stark at 23th Xylexpo

Milan, 8-12 May 2012, Hall 2P stand C55

STARK S.p.A. participate in the 23 ^ Xylexpo organized, as usual, in collaboration with dall'ACIMALL Eumabois. Since 1968 Xylexpo, even years, is the largest international trade show dedicated to the machines for working with wood and supplies for the furniture industry.

2012-02-24

Stark exhibited at GrindTec and the TUBE

GrindTec - Augsburg, 14-17 March 2012, Hall 3, stand 3104 / Tube - Dusseldorf, Hall 6, Stand 6G36

The Grindtec, born in 1998 and then to its 8th edition, is the leading European trade fair for sharpening. The TUBE Duesseldorf is the leading international trade fair dedicated to the cutting of the pipe. STARK S.p.A. participates together with the German subsidiary STARK GmbH

Vertriebsgesellschaft STARK GmbH & Co.

Robert Bosch Strasse, 47 - 73431 Aalen
Germany
Tel. +49(0)7361-55647-0
Fax +49 (0) 7361 55647-48
E-mail: post@starktools.de
Web: www.starktools.de

STARK TOOLS (SUZHOU) CO., LTD.

No. 17, Jinfeng Road
Nanfeng Town
Zhangjiagang City
Jiangsu - P.R. China (215628)
Phone +86 (0) 512 58907826/28
Fax +86 (0) 512 58907827
E-Mail: stark@starktools-cn.com

Accesso al sito

Il presente Sito Internet (il "Sito") è stato creato da STARK s.p.a. per offrire a clienti ed utenti l'opportunità di conoscere la società ed usufruire dei propri servizi in condizioni di assoluta trasparenza. Il Sito è protetto da firewall idonei a limitare al minimo la possibilità di intrusioni esterne. Si raccomanda l'attenta lettura nonché la stampa delle Condizioni che regolano i servizi offerti attraverso il Sito. Tale condizioni dovranno essere conservate a cura dell'utente.

Copyright e Marchi

Il sito è proprietà di STARK s.p.a. . Tutte le informazioni e il contenuto del sito, inclusi i programmi software, sono protetti da copyright. Nessun materiale può essere copiato, riprodotto, distribuito, modificato, ripubblicato o trasmesso senza il consenso scritto del sito autore. E' altresì vietato creare materiale derivato ovvero commercializzare qualsiasi tipo di contenuto disponibile nel o tramite il Sito. Il marchio STARK s.p.a., il logo, i marchi che contraddistinguono i diversi prodotti ed i marchi di servizio appartengono a STARK s.p.a. ovvero ai legittimi proprietari. È espressamente vietato l'utilizzo di tali marchi senza la preventiva autorizzazione scritta di STARK s.p.a. o dei legittimi titolari dei marchi.

Modalita' di utilizzo

L'organizzazione del Sito consente la massima funzionalità dei servizi offerti e la riservatezza delle informazioni trasmesse dagli utenti, in conformità agli standard tecnologici attualmente disponibili. L'uso dei servizi è assunto dall'Utente sotto la sua completa responsabilità. STARK s.p.a. non garantisce la disponibilità e la continuità dei servizi messi a disposizione attraverso il Sito ed, in particolare, declina ogni responsabilità per eventuali danni all'apparecchiatura informatica utilizzata dall'utente direttamente od indirettamente ricollegabili alla connessione alla rete Internet.

Link

Il Sito contiene collegamenti ipertestuali ad altre risorse Internet, di partner commerciali di STARK s.p.a. ovvero di terzi. L'accesso ai siti in qualsiasi modo collegati al Sito avviene ad esclusivo rischio dell'utente. STARK s.p.a. non è responsabile, né garantisce il contenuto dei siti oggetto di link e non è in alcun modo responsabile dei siti web a cui l'utente dovesse accedere dal presente sito. L'accesso ai siti in qualsiasi modo collegati al Sito avviene ad esclusivo rischio dell'utente. Inoltre, data l'impossibilità di esercitare un effettivo controllo sui contenuti, sulle informazioni, sui servizi e/o prodotti offerti da tali siti collegati, l'esistenza di un collegamento ipertestuale (link) verso un sito esterno non comporta l'approvazione o un'accettazione di responsabilità da parte di STARK s.p.a. circa il contenuto o l'utilizzazione di detto sito. STARK s.p.a., in particolare, non assume alcuna responsabilità in relazione alle caratteristiche e/o alle funzionalità dei prodotti offerti dai Dealers nei diversi canali tematici disponibili sul Sito, nonché sul contenuto e sull'accuratezza dei servizi di informazione commerciale prestati dai Dealers nei suddetti canali. STARK s.p.a. non potrà in nessun caso essere ritenuta responsabile per qualsiasi danno parziale o totale, diretto o indiretto, legato all'uso del presente sito Web o di altri siti Web a esso collegati da un link ipertestuale, ivi compresi, senza alcuna limitazione, i danni quali la perdita di profitti o fatturato, l'interruzione di attività aziendale o professionale, la perdita di programmi o altro tipo di dati ubicati sul sistema informatico o altro sistema dell'utente.

×

IL CODICE DELLA PRIVACY - Dlgs 196/03

INFORMAZIONI GENERALI

Il Dlgs n. 196/03 tutela il trattamento dei dati personali delle persone fisiche e giuridiche.

Ai sensi dell'art. 4 del predetto decreto, "TRATTARE" I DATI significa svolgere operazioni, con o senza l'ausilio di mezzi elettronici o comunque automatizzati, riguardanti la raccolta, la registrazione, l'organizzazione, la conservazione, l'elaborazione, la modificazione, la selezione, l'estrazione, il raffronto, l'utilizzo, l'interconnessione, il blocco, la comunicazione, la diffusione, la cancellazione e la distruzione dei dati medesimi. Con l'espressione "DATI PERSONALI" il legislatore si riferisce ad ogni informazione relativa a persona fisica, persona giuridica, ente od associazione, identificati o identificabili, anche indirettamente, mediante riferimento a qualsiasi altra informazione, ivi compreso un numero di identificazione personale.

I dati personali devono essere trattati in modo lecito, secondo correttezza e devono essere conservati per il tempo strettamente necessario al raggiungimento delle finalità per cui sono stati raccolti.

Quanto ai principali soggetti richiamati dal Dlgs 196/03 possiamo sintetizzare come segue. Anzitutto si parla di INTERESSATO riferendosi alla persona fisica o giuridica cui si riferiscono i dati personali. Il decreto considera l'interessato come soggetto tutelato ed a tal fine gli attribuisce una pluralità di diritti (es. il diritto di ottenere informazioni relativamente ai dati ed ai trattamenti effettuati, il diritto di chiedere la cancellazione, la trasformazione in forma anonima ovvero il blocco dei dati trattati in violazione della predetta legge, compresi quelli di cui non è più necessaria la conservazione in relazione agli scopi per i quali i dati sono stati raccolti o successivamente trattati...).

TITOLARE DEL TRATTAMENTO è la persona, fisica o giuridica, responsabile del trattamento dei dati dell'interessato. Al titolare spettano le decisioni circa le finalità e le modalità del trattamento. Il RESPONSABILE DEL TRATTAMENTO è la persona, fisica o giuridica, designata dal Titolare del trattamento, mentre l'INCARICATO è colui che tratta effettivamente i dati cui ha accesso pur senza autonomia decisionale. Il GARANTE è l'organo collegiale super partes preposto al controllo della corretta applicazione della normativa, dinanzi al quale è possibile far valere i propri diritti in via alternativa all'autorità giudiziaria.

×